AS/ACIF S038:2001 Requirements for ISDN Primary Rate Access Interface

AS/ACIF S038_2001.pdf
This Standard specifies the technical conditions and performance requirements, at the Physical, Data Link and Network Layers (Layers 1, 2 and 3), for CE that is intended for connection to an ETSI Integrated Services Digital Network (ISDN) Primary Rate Access Digital Subscriber Signalling No. 1 (DDS 1) interface for the purpose of receiving information from, or transmitting information to, the ISDN at the T reference point. Where CE is also intended to connect to the ISDN Primary Rate Access services based on ACA Technical Standard 014 [1], then CE is to also meet the requirements specified in ACA Technical Standard 014 [1].

Regulatory Notice

This document was made by the Australian Communications Authority (ACA) as Telecommunications Technical Standard AS/ACIF S038 2001 under section 376 of the Telecommunications Act 1997. The ACA was a Commonwealth authority with statutory powers to impose requirements concerning telecommunications Customer Equipment and Customer Cabling and was replaced on 01 July 2005 by the Australian Communications and Media Authority (ACMA). The ACMA requires Australian manufacturers and importers of specified items of Customer Equipment and Customer Cabling to establish compliance with Standards such as this. Items are required to be labelled to the applicable labelling notices. Details on current compliance arrangements can be obtained from the ACMA website at http://www.acma.gov.au.

Reconfirmation

The Standard was reconfirmed in 2007 and the next review is scheduled to occur in September 2012.