AS/ACIF S031:2001 Requirements for ISDN Basic Access

AS/ACIF S031_2001.pdf
This Standard specifies the technical conditions and performance requirements for certain Customer Equipment (CE) at the Physical, Data Link and Network Layers (Layers 1, 2 and 3) when connected to an Integrated Services Digital Network (ISDN) Basic Access interface at the S/T reference point. The equipment covered by this Standard is all CE that is intended for connection to an Integrated Services Digital Network (ISDN) Basic Access for the purpose of receiving information from, or transmitting information to, the ISDN.

This Standard applies to the following types of ISDN: ETSI Standards based ISDN Basic Access and AUSTEL Technical Standard 013 [1][2] based ISDN Basic Access.

Regulatory Notice

This document was made by the Australian Communications Authority as Telecommunications Technical Standard AS/ACIF S031 2001 under section 376 of the Telecommunications Act 1997. The ACA was a Commonwealth authority with statutory powers to impose requirements concerning telecommunications Customer Equipment and Customer Cabling and was replaced on 01 July 2005 by the Australian Communications and Media Authority (ACMA). The ACMA requires Australian manufacturers and importers of specified items of Customer Equipment and Customer Cabling to establish compliance with Standards such as this. Items are required to be labelled to the applicable labelling notices. Details on current compliance arrangements can be obtained from the ACMA website at http://www.acma.gov.au.

Reconfirmation

The Standard was reconfirmed in 2007 and the next review is scheduled to occur in September 2012.