|
Provides guidelines to assist Communications Alliance Working Committees in determining what matters should be considered when drafting new or revised Consumer Codes. |
|
|
|
Provides a clear set of principles and guidelines relating to change of mobile service. |
|
|
|
Provides a framework for the development and operation of industry operations codes |
|
|
|
Specifies agreed network arrangements for the provision of 1800/13/1300 number portability |
|
|
|
Describes how ACIF Codes are administered and the obligations of signatories to ACIF Codes. |
|
|
|
The Guideline provides assistance in the practical application of the legislation covering listening and recording of voice communications. |
|
|
|
Provides recommended procedures for industry monitoring and recording of voice communications when installing, operating or maintaining a network. |
|
|
|
Defines an indicator for mobile location for calls to emergency services. |
|
|
|
Guideline to Communications Alliance Working Committees to determine what should be addressed in new or revised Technical Standards on protecting the integrity of a network. |
|
|
|
Guideline to Communications Alliance Working Committees developing or revising Standards to ensure Customer Equipment can call an emergency service. |
|
|
|
Guideline to Communications Alliance Working Committees for recommending compliance levels for Customer Equipment. |
|
|
|
Describes the interconnection arrangements in Australia for circuit switched networks. |
|
|
|
Guideline for Working Committees for reporting on changes to revised Standards. |
|
|
|
Defines parameters and methods for frequency co-ordination between different HFC systems that are close to one another. |
|
|
|
Addresses the suitability of Customer Equipment covered by the AS/ACIF S042 series for network integrity and interoperability. |
|
|
|
Provides a comprehensive set of guiding principles for the introduction of MNP - regulatory, end-user and operational |
|
|
|
A pack of 5 compressed files (3,621KB) that define the SMSAs for use in the interim signalling of mobile caller location and 3 digit 'ABC' codes for caller location. |
|
|
|
Defines the industry agreed call handling arrangements to support mobile number portability. |
|
|
|
Specifies the requirements and safeguards for future methods of customer authorisation, e.g. written, verbal and electronic. |
|
|
|
Sets out the information about DSL CE that should be made available to consumers and retailers and a process for suppliers of DSL CE to be able to verify interoperability. |
|
|
|
ACIF G565:2001 specifies industry agreed routing arrangements to enable correct delivery of inter-carrier SMS. |
|
|
|
Defines inter-operator principles to manage the co-existence of wholesale customer churn and rebilling. |
|
|
|
Defines standardised processes for the installation of telecommunications infrastructure in multi-tenanted buildings e.g. office blocks, apartment buildings. |
|
|
|
Describes processes for service providers to record, track and resolve customer and network ULLS faults and to restore services. |
|
|
|
Identifies the functional and technical baseline requirements for the support of Mobile Number Portability |
|
|
|
Identifies and defines the XML format for the MNP intercarrier messaging. |
|
|
|
Specifies the requirements for the Messaging Nodes of the MNP Messaging Platform. |
|
|
|
Defines technical specifications for interfacing with and the behaviour of a Single and Multiple Provider Private IP Network for MNP. |
|
|
|
Provides guidance for Suppliers on ongoing customer information provision about Mobile Number Portability |
|
|
|
The Register is required to enable routing of calls following Mobile Number Portability and updates of systems. |
|
|
|
Describes the network testing for voice, fax and data services to be conducted for mobile number portability. |
|
|
|
Describes the network testing to be conducted for mobile number portability for SMS. |
|
|
|
Sets out the arrangements for MNP processes between organisations in the implementation of Mobile Number Portability. |
|
|
|
Specifies conventions for implementing the translations required to deliver SMS between CDMA and GSM networks. |
|
|
|
Outlines considerations for industry participants to ensure that the communication needs of people with disabilities and older people are met. |
|
|
|
Provides guidance to Road Authorities and Carriers on the installation, maintenance and safety issues associated with telecommunications in road reserves. |
|
|
|
Provides the framework for new participants in Mobile Number Portability to undertake Industry Testing. |
|
|
|
Details the test components required for a new industry participant to successfully complete MNP testing with all current participants. |
|
|
|
Provides a procedure for the cooperative handling of incidents that require the coordination and communication support of Emergency response. |
|
|
|
Defines the arrangements for the implementation of pre-selection processes between Service Providers. |
|
|
|
Specifies the files, records and operational details of the interface supplying the customer billing information between Service Providers following the customer's use of an Override Code |
|
|
|
Specifies the file formats and field population rules required to facilitate the pre-selection related transactions described in the Pre-selection Code. |
|
|
|
Specifies the processes and procedures for the application for and the allocation of Eligible Party Identification Codes for use between service providers. |
|
|
|
Defines operational arrangements and IT Specifications for the implementation of Local Number Portability processes between Carriers and CSPs. |
|
|
|
Defines the Category A Processing arrangements and IT Specifications for the implementation of LNP between Service Providers. |
|
|
|
Defines the Category B Processing arrangements and IT Specifications for the implementation of LNP between Service Providers. |
|
|
|
Defines the Category C Processing arrangements and IT Specifications for the implementation of LNP between Service Providers. |
|
|
|
Defines the Category D Processing arrangements and IT Specifications for the implementation of LNP between Service Providers. |
|
|
|
Defines the framework for testing of IT Specifications associated with LNP |
|
|
|
Defines the ongoing MNP specific testing recommended to be performed by new PSDs and Mobile Carriers. |
|
|
|
Guideline for the connection of networks based on Asynchronous Transfer Mode (excludes User-Network Interface signalling). |
|
|
|
Defines the processes and procedures relating to the management of the Standardised Mobile Service Area (SMSA) Register (ACIF G557). |
|
|
|
Specifies the testing required to deliver SMS between CDMA and GSM networks |
|
|
|
Specifies the requirements of the EIEnet to provide interconnectivity for electronic information exchange between participants. |
|
|
|
Provides background to customer equipment safety standardisation, a summary of the review process and the impact on consumers and industry |
|
|
|
Provides guidance to assist Communications Alliance in ensuring that its documents meet privacy requirements. |
|
|
|
Defines the customer requested blocking of access from a customer's telephone service to a Service Provider's service. |
|
|
|
Provides the basic framework for testing general LNP functionality and new participants to LNP. |
|
|
|
Defines the framework for the testing of IT Specifications prior to the implementation of ACIF C515 Pre-selection Code and associated Guidelines. |
|
|
|
Specifies the detailed IT Test Plans required to be successfully completed prior to the implementation of ACIF C515:2005 Pre-selection Industry Code and associated Guidelines. |
|
|
|
This Guideline provides guidance to reduce the risk and severity of acoustic shock. |
|
|
|
Describes the process for proposing Non-Deployment Class Systems and gives detailed requirements for the information which must be submitted by the proposer. |
|
|
|
Provides assistance to Data Providers and Data Users in ensuring the accurate capture and entry of data into the Integrated Public Number Database. |
|
|
|
Identifies the EIE Compliance Standards and introduces and explains the steps required for an Application Provider to setup an application using EIE infrastructure. |
|
|
|
Provides the basis of the framework for new Participants to undertake successful EIE connectivity testing with the EIE Administration Node. |
|
|
|
Output of a review of the Standards and regulatory arrangements for customer equipment (CE) safety in Australia. |
|
|
|
Provides guidance for designers of customer equipment (CE) and test laboratories, indicating the minimum voltage levels that should be supported for each category of CE. |
|
|
|
The Guideline provides matrices against which equipment suppliers report on the accessibility features of their equipment. |
|
|
|
Provides guidance in the design and provision of payphones to ensure their accessibility for people with disabilities. |
|
|
|
This Guideline accompanies the TCP Code and is designed to aid in interpreting the TCP Code Rules and provide examples of how a Supplier may choose to comply with the Rules. |
|
|
|
This Guideline defines a number of IP Network QoS Classes, including performance expectations for each class, and methods of ‘marking’ packets to signal to a receiving network which IP Network QoS Class is expected to be applied to the packet as it travels through the network. |
|
|
|
This Guideline recommends test methods for the IP Network QOS Classes defined in G632. |
|
|
|
This Guideline recommends Quality of Service (QoS) categories and identifies influencing impairments for Voice over Internet Protocol (VoIP) Services within Australia. |
|
|
|
This Guideline recommends testing methods for G634 i.e. testing arrangements for Quality of Service (QoS) parameters for Voice over Internet Protocol (VoIP) Services independent of the network delivery access or mechanism. |
|
|
|
Guideline for CSPs ensuring the accuracy of geographic numbering records published. |
|
|
