|
Customer Access Equipment for connection to a Telecommunications Network |
|
|
|
Customer Access Equipment for connection to a Telecommunications Network |
|
|
|
Specifies the frequency and acoustic performance requirements for speech and tones (e.g. for distortion, loudness and acoustic shock). These requirements are for telephones that connect to the PSTN or ISDN. |
|
|
|
Specifies the frequency and acoustic performance requirements for speech and tones (e.g. for distortion, loudness and acoustic shock). These requirements are for telephones that connect to the PSTN or ISDN. |
|
|
|
Specifies requirements for non-switching telephone equipment used in businesses, e.g. equipment connected to a tie-line. |
|
|
|
Specifies requirements for telephone cables and cabling products (e.g. plugs, sockets, enclosures) used in customer’s premises and businesses. It does not cover cables or products used in the network by carriers. |
|
|
|
Specifies the rules for cablers must follow for the installation or repair of cables in customer premises and businesses. It does not cover cable installations in the carriers’ networks. |
|
|
|
Specifies the common requirements for mobile phones such as GSM, CDMA and WCDMA such as the ability to call the emergency call services 000, 112 and 106. |
|
|
|
Specifies the common requirements for mobile phones such as GSM, CDMA and WCDMA such as the dialling of emergency call services (000, 112 & 106) and acoustic safety requirements. |
|
|
|
AS/ACIF S043.1:2001 specifies the technical requirements for Customer Equipment (CE) that is designed or intended for connection to a Telecommunications Network via a metallic local loop interface. This Standard does not apply to CE designed or intended for connection to HFC, coaxial cable or wireless local loop. |
|
|
|
Specifies the requirements for broadband equipment connected to copper wire pairs e.g. DSL modems. |
|
|
|
Specifies the requirements for broadband equipment connected to copper wire pairs e.g. DSL modems. |
|
|
|
Specifies the requirements for connected to copper wire pairs that can deliver DC, and AC signals |
|
|
|
ACIF G503:1998 Service Description - Mobile (origin) Location Indication withdrawn |
|
|
|
ACIF G526:1999 - Specification of Signalling System No 7 - Stage 1 Supplementary Description for Mobile Location Information (MOLI) |
|
|
|
ACIF G527:1999 - Specification of Signalling System No 7 - Stage 3 Supplementary Service Description for Mobile Location Information (MOLI) |
|
|
|
Defines the minimum performance requirements for broadband services on phone lines (e.g. ADSL, ADSL2+, SHDSL). |
|
|