AS/ACIF S042.1:2008 Requirements for connection to an air interface of a Telecommunications Network - Part 1: General

AS/ACIF S042.1:2008 (.pdf, 2666 KB)

Specifies the general requirements for Customer Equipment (CE) that is designed or intended for use in connection with a PMTS and is an addressable device or a Satellite Service and is an addressable satellite device. This Standard does not apply to CE which are non-addressable satellite devices such as GPS terminals and satellite navigation systems.

Regulatory notice

This document has been made by ACMA as Telecommunications Technical Standard AS/ACIF S042.1–2008 under s376 of the Telecommunications Act 1997. ACMA is a Commonwealth authority with statutory powers to impose requirements concerning telecommunications Customer Equipment and Customer Cabling. ACMA requires Australian manufacturers and importers of specified items of Customer Equipment and Customer Cabling to establish compliance with Standards such as this. Items are required to be labelled to the applicable labelling notices. Details on current compliance arrangements can be obtained from the ACMA website at www.acma.gov.au.

This document was superseded by AS/CA S042.1:2010. The superseded Standard is available at www.commsalliance.com.au/documents/available_superseded and is still an applicable Standard under the ACMA Telecommunications Labelling (Customer Equipment and Customer Cabling) Notice 2001 until its expiry date. A complete list of applicable Standards can be found at the ACMA Equipment Standards website at www.acma.gov.au/WEB/STANDARD/pc=PC_2545.